Medical Equipment Warranty vs AMC: What to Check
Medical equipment warranty or AMC? Compare coverage, parts, calibration, response times and expiry checks for healthcare facilities in India.

A medical device may arrive with a warranty, yet a facility can still discover that a routine inspection, calibration, replacement accessory, or on-site visit is outside that warranty. Later, the facility may sign an annual maintenance contract (AMC) and assume that every failure is covered. Neither assumption is safe. For a hospital, rehabilitation centre, diagnostic unit, or wellness facility, the useful question is not simply, “Does this device have a warranty or AMC?” It is, “Who will do which work, on which device, within what time, and with what record?”
This guide compares warranty and AMC agreements from the facility's point of view. It focuses on coverage, handover, service response, and continuity. If you need a task-by-task maintenance programme, read our separate medical equipment AMC checklist. The two decisions belong together, but a contract review and a maintenance workflow solve different problems.
The basic difference between a warranty and an AMC
A manufacturer or supplier warranty is a promise described in the sale documents. It usually applies for a defined period and to specified defects or failures under stated conditions. Its start date, exclusions, remedy, service location, and responsible party should be written down. A warranty does not automatically include every preventive visit or every consumable. The exact contract controls.
An annual maintenance contract is a separate service arrangement for a defined period. Depending on the wording, it may include scheduled preventive maintenance, fault calls, inspection, software support, calibration coordination, labour, and some replacement parts. Some agreements are limited to service visits and labour; others are more comprehensive. The label “AMC” alone does not tell you the scope.
An agreement may also be called a comprehensive maintenance contract (CMC) or service agreement. In India, those names appear in procurement documents, but a buyer should compare the actual inclusions and exclusions rather than rely on the acronym. The Ministry of Health and Family Welfare has separately discussed warranty, AMC, and CMC arrangements in its report on procurement and maintenance of medical equipment. This is a procurement reference, not a universal template for every private facility or device.
Start with one device and one documented service owner
Facilities sometimes hold a purchase order from a dealer, a manufacturer's warranty card, and a service number from a third-party engineer. When a device stops working, staff may not know whom to contact. Before accepting the equipment, record the manufacturer, model, serial number, installation location, commissioning date, and contact details for the person or company that is contractually responsible for service. Ask whether a dealer is only coordinating service or is itself accountable for completing it.
The service owner should be clear for both routine work and unexpected faults. If a warranty claim must be routed through a distributor, document that route. If an AMC provider can service the device only after manufacturer authorization, document that limitation too. One clear escalation path is more useful than several phone numbers with unclear responsibilities.
This information belongs in the device inventory and handover file. The World Health Organization describes health technology management as a life cycle that includes procurement, incoming inspection, inventory, training, maintenance, and eventual decommissioning. See its 2025 guidance on medical-device inventory and maintenance information systems.
Check when coverage actually starts and ends
Do not assume that the warranty begins on the invoice date or that it begins only when the device is first used. Check the written start date, the commissioning or acceptance certificate, and the expiry date. A long delay between delivery and installation can matter. So can a device that has been installed but has not yet passed acceptance testing.
Record the warranty end date in a shared calendar well before it arrives. Review the proposed AMC scope while the current support arrangement is still active. If the facility waits until after expiry, there may be a period in which staff are unsure whether a fault call is covered. The transition should identify the first day of the new agreement, the condition of the device at takeover, and any open fault or pending part request.
For a newly installed unit, the medical device installation and handover checklist helps teams verify documentation, training, and release to use. The warranty record should be completed during that handover, not months later.
Compare the actual work covered
Ask the supplier to answer each item for the exact model and accessories being purchased. A short written matrix is easier to use than a general promise of “full support.”
Preventive maintenance
How many planned visits are included? What tasks follow the manufacturer's instructions? Are performance and electrical safety checks included where relevant? Who schedules the visits, and what happens if a visit is missed? An AMC that promises visits without stating the work to be done leaves room for confusion.
Corrective repairs
When a fault occurs, does coverage include remote troubleshooting, an on-site engineer, diagnosis, labour, and post-repair performance checks? Does the provider need prior approval before replacing a component? Are faults caused by routine wear treated differently from defects? These distinctions determine whether a service request moves quickly or becomes a dispute.
Parts, accessories, and consumables
A sensor, probe, battery, cable, treatment applicator, filter, or disposable item may have its own coverage rule. Request a model-specific list of included parts and exclusions. Also ask whether the provider uses manufacturer-approved parts, how substitutions are authorized, and how long a critical replacement typically takes. Do not assume that a contract covering labour also covers parts.
Calibration and software
For equipment that requires calibration or performance verification, ask who performs it, at what interval, and what certificate or report is supplied. For connected devices, clarify whether firmware updates, software patches, license support, data backup guidance, and cybersecurity-related support are included. Updates should be performed according to the manufacturer's procedures and the facility's change-control process. A general service agreement may leave these tasks to a different provider.
The WHO medical equipment maintenance programme overview distinguishes performance and safety inspection, preventive maintenance, and corrective maintenance. That distinction is useful when reading any service scope: each activity should be stated, assigned, and documented.
Define service response in operational terms
“Priority service” sounds reassuring but is hard to manage without a definition. Ask what counts as a reportable fault, how the facility opens a ticket, when the clock starts, and how quickly a qualified person will acknowledge the request. Separate remote response from on-site arrival and from restoration of service. These are different milestones.
Consider what the facility will do if a device cannot be returned to safe use promptly. Is a loaner or replacement arrangement available for that equipment type? Who decides whether the device can remain in limited service? The clinical or technical team should make that safety decision under the manufacturer's instructions, not a marketing promise in a contract.
Keep ticket numbers, fault descriptions, actions taken, parts fitted, test results, and the date the device was released back to use. These records reveal recurring faults and make the next service call more efficient. They also help the facility judge whether its support arrangement is working as promised.
Include operator training and escalation
Some apparent device faults are caused by setup problems, worn accessories, or an operator who has not been trained on a particular mode. That does not mean staff should attempt repairs. It means the agreement should state what operator refresher training and first-line guidance are available. Include a route for users to report unusual readings, error codes, or physical damage without feeling pressured to keep using the device.
The service provider should identify who may open a ticket and who may approve work. In a small facility, these may be the same person. In a larger organisation, a biomedical team may triage requests and coordinate with clinical users. Document out-of-hours arrangements for devices that are essential to care. A phone number is useful only if staff know when and how to use it.
Read exclusions before the device is needed
Exclusions can include accidental damage, liquid ingress, unauthorized modifications, power-quality problems, environmental conditions, misuse, transport damage, consumables, or third-party accessories. The exact list differs by device and agreement. Ask the provider to show how a claim would be handled when the cause is uncertain. Also clarify whether a manufacturer warranty can be affected by unauthorized repairs or components.
Review the installation and operating conditions stated by the manufacturer, including power, ventilation, temperature, and approved accessories. If the facility cannot meet those conditions, solve that gap before relying on the warranty. For device-specific room readiness and acceptance checks, the installation and handover guide is the appropriate companion article.
No contract replaces a facility's own equipment governance. Staff still need a way to identify a potentially unsafe device, remove it from use, and obtain a qualified assessment. Routine service should follow manufacturer instructions and applicable facility policies.
A practical pre-signing checklist
Before accepting a warranty statement or AMC, ask for written answers to these questions:
- Which manufacturer, model, serial numbers, accessories, and software versions are covered?
- What are the exact start and end dates, and what event starts the term?
- Who is accountable for service: manufacturer, distributor, or an authorized third party?
- Which preventive, corrective, calibration, and software tasks are included?
- Which parts, accessories, and consumables are excluded?
- How are faults reported, acknowledged, escalated, and closed?
- What evidence will be supplied after each visit or repair?
- What happens when a part is unavailable or the device remains out of service?
- What training and handover documents are included?
- How will support continue when the current coverage ends?
Keep the signed scope, service contacts, manuals, acceptance documents, and visit reports together in the equipment record. If the facility has multiple similar devices, verify that each serial number is listed. A generic contract with no device schedule can be difficult to apply when an engineer arrives.
How warranty review and maintenance planning fit together
The warranty or AMC defines a provider's obligations. The facility's maintenance programme defines how staff keep the device accounted for, inspected, and safe to use. A provider may complete every promised visit while a facility still misses an internal check or loses an inspection report. Conversely, an excellent internal checklist cannot create service coverage that the contract never included.
Use the AMC maintenance checklist to build the operational process after coverage is agreed. For facilities selecting new technology, medical equipment planning for longevity services shows how intended use and workflow shape the equipment shortlist. If you need help mapping equipment requirements to service support, contact Regenis with the device category and intended setting.
Frequently asked questions
Does a medical equipment warranty include preventive maintenance?
Sometimes, but not automatically. The written warranty may cover defects while scheduled inspections are offered separately. Check the device-specific terms, visit schedule, and service records.
Is an AMC the same as a comprehensive maintenance contract?
No fixed label guarantees identical coverage. An AMC may cover planned visits and labour, while another agreement may include parts or broader support. Compare the clauses and exclusions for the exact device.
Can a facility use a third-party service provider?
The answer depends on the device, contract, manufacturer instructions, and the provider's qualifications. Confirm whether third-party work affects warranty coverage, access to approved parts, software, calibration, or safety testing before changing providers.
What should happen before a warranty expires?
Verify the expiry date, close open fault tickets, review the device's service history, and agree the next support arrangement. Record the takeover condition and make sure the new coverage begins without an unexplained gap.
Which documents should be kept after a service visit?
Keep the ticket number, work performed, parts used, inspection or calibration results where applicable, the engineer's details, and the decision to return the device to use. The facility should retain these with the device inventory and service history.
Does an AMC make a medical device safe to use?
No. A contract helps organize support, but safety depends on correct installation, trained operation, reporting of faults, inspections, and qualified assessment before a device returns to service.
